UBLOX GPS CHIP & COMPASS NEO M8N NEO-M8N MODULE MULTIROTOR PIXHAWK APM 2.6

More Views

  • UBLOX GPS CHIP & COMPASS NEO M8N NEO-M8N MODULE MULTIROTOR PIXHAWK APM 2.6
  • UBLOX GPS CHIP & COMPASS NEO M8N NEO-M8N MODULE MULTIROTOR PIXHAWK APM 2.6
UBLOX GPS CHIP & COMPASS NEO M8N NEO-M8N MODULE MULTIROTOR PIXHAWK APM 2.6

Availability: In stock

UBLOX GPS CHIP & COMPASS NEO M8N NEO-M8N MODULE MULTIROTOR PIXHAWK APM 2.6

sku: Ublox M8N

Click Logo for All

Regular Price: £54.99

Special Price £44.99

+Add to Wishlist

Ublox NEO-M8N GPS & MAG (Compass) V2.1

   


 
 
Lock more satellites and make your drone far more stable with higher RTH accuracy with this Multi Constellation super fast 10Hz GPS chip (GPS, GLONASS, Galileo, QZSS and SBAS) fitted with HMC5883L compass. It should ideally be mounted 150mm 6" away from sources of interference . It features active circuitry for the ceramic patch antenna, rechargeable backup Capacitors for warm starts.

    The GPS is designed for APM / Pixhawk and includes  the cable for Pixhawk.

    Change the 1.25-6P plug shell to 5P to fit APM.


    NOTE: When connected to either APM 2.xx or Pixhawk, the firmware recognizes the ublox GPS
    and sends instruction to set the baudrate to 38,400, rate to 5Hz, turn off NMEA protocol, turn on UBX protocol, as well as other settings suited for use with APM and Pixhawk meaning that the "Default parameters" are irrelevant as they are overridden by the APM or Pixhawk firmware.

GPS Chip parameters:
 
Receiver type 72-channel u-blox M8 engine
GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
SBAS L1 C/A: WAAS, EGNOS, MSAS
Galileo-ready E1B/C (NEO-M8N)
Nav. update rate1 Single GNSS: up to 18 HZ
Concurrent GNSS: up to 10 Hz
Position accuracy2 2.0 m CEP
Acquisition2 Cold starts: 26 s
Aided starts: 2 s
Reacquisition: 1.5 s
Sensitivity2 Tracking & Nav: –167 dBm
Cold starts: –148 dBm
Hot starts: –156 dBm
Assistance AssistNow GNSS Online
AssistNow GNSS Offline (up to 35 days)3
AssistNow Autonomous (up to 6 days)
OMA SUPL & 3GPP compliant
Oscillator TCXO (NEO-M8N/Q),
Crystal (NEO-M8M)
RTC crystal Built-In
Noise figure On-chip LNA (NEO-M8M). Extra LNA for
lowest noise figure (NEO-M8N/Q)
Anti jamming Active CW detection and removal. Extra
onboard SAW band pass filter (NEO-M8N/Q)
Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)
Supported antennas Active and passive
Odometer Travelled distance
Data-logger For position, velocity, and time (NEO-M8N)
Operating temp. –40° C to 85° C
Storage temp. –40° C to 85° C (NEO-M8N/Q)
–40° C to 105° C (NEO-M8M)
RoHS compliant (lead-free)
Qualification according to ISO 16750
Manufactured and fully tested in ISO/TS 16949 certified production sites
Uses u-blox M8 chips qualified according to AEC-Q100
Supply voltage 1.65 V to 3.6 V (NEO-M8M)
2.7 V to 3.6 V (NEO-M8N/Q)
Power consumption4 23 mA @ 3.0 V (continuous)
5 mA @ 3.0 V Power Save Mode
(1 Hz, GPS mode only)
Backup Supply 1.4 to 3.6 V
NEO-M8N-0 u-blox M8 Concurrent GNSS LCC Module,
TCXO, flash, SAW, LNA,
 Timepulse Configurable 0.25 Hz to 10 MHz