The Midge 210 RS 3mm Frame

More Views

  • The Midge 210 RS 3mm Frame
  • Midge 210 RS
  • Midge 210 FPV Racing Drone
  • Midge 210 Racing Drone
  • Midge 210 Racer
  • The Midge 210 RS 3mm Frame
  • The Midge 210 RS 3mm Frame
The Midge 210 RS 3mm Frame

Availability: In stock

The Midge 210 RS 3mm Frame

sku: MIDGE 210 RS

Click for all

Regular Price: £69.99

Special Price £54.99

+Add to Wishlist

The Midge 210 Race Spec 3mm Frame 

 

The MIDGE 180 has HATCHED a new big brother, the new MIDGE 210 RS

The Midge 210 RS is a 3mm FPV racing frame, lighter and faster than its 4mm brother making it more suited to track racing where weight is key. Also Connex Prosight ready like the 4mm version.

A unique single piece MONO body cut from 100% real 3K twill 3mm carbon fibre sets the Midge 210 apart from the rest. Topped off with a tough 1.5mm carbon fibre top plate, the frame is designed to mount a Foxeer HS1177 or the Fatshark 700 TVL camera, in addition to this you can now use the CONNEX PROSIGHT HD video System as we have designed the frame to fit it perfectly. We have cut mounting holes for the Connex Prosight in the top plate so it can securely bolt to the underside, out of harms way. 25mm standoff's (30mm if you are using Connex) gives the Midge 210 a real low rider look and the ability to get through gaps 250's can only dream of. A full hardware kit with proper stainless steel screws for the build is also supplied as well as a kooltoyz battery strap.

The frame is designed to be the smallest possible airframe while comfortably supporting 5" props and 22XX size motors

 It has 36mm flight controller hole pattern drilled for KISS, LUXFLOAT, Naze, CC3D, SP racing boards, it will take most 22XX sized motors and is designed to run 5045 Bullnose props. The top plate has also been cut to house all your important electronics with the dual camera mount design at the front and a hole at the rear for you VTX antenna to pop through and clamp in securely. We have also made a window for your VTX dip switches to be easily accessed and mounting points for your receiver with aerial holes to keep that RSSI at bay. The top plate is designed to mount these components on the underside of it with convenient zip tie slots as space is tight. 

 

The machine was designed, cut and tested by Rotortronics in Scotland. (UK)

This frame is only available here.

 

What you get in the package:-

 

1x 3mm 4k Twill Carbon Fibre Mono Body

1x 1.5mm 4k Twill Carbon Fibre Top Plate

1x 3mm 4k Twill Carbon Fibre Cam Mount

1x Kooltoyz Battery Strap

8x M3 25mm Male/Male Nylon Standoffs

12x M3 8mm Button Head Stainless Steel screws

4x M3 8mm Button Head Stainless Steel screws 

4x M3 8mm Inertic Mounts

Specifications:-

Size:-210mm Frame

3mm 4K Twill Carbon Fibre Mono Body

1.5mm 4K Twill Carbon Fibre Top Plate

Weight:- 115 Grams (With Standoffs & Hardware)

 RCmodel Reviews

Oscar Liang Midge 180 Review