Need Help? Call us on: 0131 663 3377

The Midge 210 4mm Frame

Special Price £59.99 Regular Price £74.99
Out of stock
The Midge 210 4mm Frame

The Midge 210  4mm Frame 


The MIDGE has HATCHED a new big brother, the new MIDGE 210 

The Midge 210 4mm  FPV racing frame is the future of FPV racing, fast and nimble and Connex Prosight ready it leaves other 210 machines in it's dust.

A unique single piece MONO body cut from 100% real 3K twill 4mm carbon fibre sets the Midge 210 apart from the rest. Topped off with a tough 1.5mm carbon fibre top plate, the frame is designed to mount a Foxeer HS1177 or the Fatshark 700 TVL camera, in addition to this you can now use the CONNEX PROSIGHT HD video System as we have designed the frame to fit it perfectly. We have cut mounting holes for the Connex Prosight in the top plate so it can securely bolt to the underside, out harms way. 25mm standoff's (30mm if you are using Connex) gives the Midge 210 a real low rider look and the ability to get through gaps 250's can only dream off. A full hardware kit with proper stainless steel screws for the build is also supplied as well as a kooltoyz battery strap.

The frame is designed to be the smallest possible airframe while comfortably supporting 5" props and 22XX size motors

 It has 36mm flight controller hole pattern drilled for KISS, LUXFLOAT, Naze, CC3D, SP racing Acro Cleanflight boards, it will take most 22XX sized motors and is designed to run 5045 Bullnose props. The top plate has also been cut to house all your important electronics with the dual camera mount design at the front and a hole at the rear for you VTX antenna to pop through and clamp in securely. We have also made a window for your VTX dip switches to be easily accessed and mounting points for your receiver with aerial holes to keep that RSSI at bay. The top plate is designed to mount these components on the underside of it with convenient zip tie slots as space is tight. 


The machine was designed, cut and tested by Rotortronics in Scotland. (UK)

This frame is only available here.


What you get in the package:-


1x 4mm 3k Twill Carbon Fibre Mono Body

1x 1.5mm 3k Twill Carbon Fibre Top Plate

1x 4mm 3k Twill Carbon Fibre Cam Mount

1x Kooltoyz Battery Strap

8x M3 25mm Male/Male Nylon Standoffs

12x M3 8mm Button Head Stainless Steel screws

4x M3 8mm Button Head Stainless Steel screws 

4x M3 8mm Inertic Mounts



Size:-210mm Frame

4mm 3K Twill Carbon Fibre Mono Body

1.5mm 3K Twill Carbon Fibre Top Plate

Weight:- 142 Grams (Inc Standoffs + Screws)

Weight 142g (With Standoffs & Hardware)

 RCmodel Reviews

Oscar Liang Midge 180 Review

More Information
Is Featured No
Private Event Use Category Settings
Private Event Landing Page ------------------------------
Write Your Own Review
You're reviewing:The Midge 210 4mm Frame
Your Rating