The Midge 210 4mm Frame RTF
This is our Midge 210 4mm RTF version fully built, setup, flown and tuned in house, just ready to switch on and fly.
Battery charger required
The MIDGE has HATCHED a new big brother, the new MIDGE 210
The Midge 210 4mm FPV racing frame is the future of FPV racing, fast and nimble and Connex Prosight ready it leaves other 210 machines in it's dust.
A unique single piece MONO body cut from 100% real 3K twill 4mm carbon fibre sets the Midge 210 apart from the rest. Topped off with a tough 1.5mm carbon fibre top plate, the frame is designed to mount a Foxeer HS1177 or the Fatshark 700 TVL camera, in addition to this you can now use the CONNEX PROSIGHT HD video System as we have designed the frame to fit it perfectly. We have cut mounting holes for the Connex Prosight in the top plate so it can securely bolt to the underside, out harms way. 25mm standoff's (30mm if you are using Connex) gives the Midge 210 a real low rider look and the ability to get through gaps 250's can only dream off. A full hardware kit with proper stainless steel screws for the build is also supplied as well as a kooltoyz battery strap.
The frame is designed to be the smallest possible airframe while comfortably supporting 5" props and 22XX size motors
It has 36mm flight controller hole pattern drilled for KISS, LUXFLOAT, Naze, CC3D, SP racing Acro Cleanflight boards, it will take most 22XX sized motors and is designed to run 5045 Bullnose props. The top plate has also been cut to house all your important electronics with the dual camera mount design at the front and a hole at the rear for you VTX antenna to pop through and clamp in securely. We have also made a window for your VTX dip switches to be easily accessed and mounting points for your receiver with aerial holes to keep that RSSI at bay. The top plate is designed to mount these components on the underside of it with convenient zip tie slots as space is tight.
The machine was designed, cut and tested by Rotortronics in Scotland. (UK)
This frame is only available here.
What you get in the package:-
FlySky FS-i6S 2.4GHz 6CH Transmitter
Flysky X6B 2.4G 6CH Receiver
KAKUTE F3 Flight Controller
Emax RS2205 (Red Bottom) 2300KV Race Motors (4)
EMAX Bullet 30A Oneshot ESC's
DYS 5x4 NYLON GLASS FIBER TRI BLADE (2 Sets)
Acehe 1300mAH 50C 4S LiPo Battery
Foxeer Switchable VTX
Foxeer 800 TVL Camera
Pagoda 5.8Ghz Omni Antenna
4mm 3K Twill Carbon Fibre Mono Body
1.5mm 3K Twill Carbon Fibre Top Plate
Weight 142g (With Standoffs & Hardware)