THE MIDGE 180 RS 3mm
- Click Logo for All
The Midge 180 Race Spec 3mm
The MIDGE has HATCHED a new little brother, the new MIDGE 180 Race Spec, cut from 3mm fibre makes it lighter than its 4mm sibling and fast for track racing.
The Midge 180 V2 mini FPV racing frame has evolved from our popular V1 design.
A unique single piece MONO body cut from 100% real 3K twill 3mm carbon fibre sets the Midge 180 apart from the rest. Topped off with a tough 1.5mm carbon fibre top plate and super tough 3mm Cam plate, we havent left anything for the customers to work out. We now have 8x 25mm standoff's so the rear off the top plate can no longer snap. Running 25mm standoffs gives the Midge a real low rider look and the ability to get through gaps 250's can only dream off. A full hardware kit with proper stainless steel screws for the build is also supplied as well as a kooltoyz battery strap.
The frame has been designed with common parts in mind and has 36mm flight controller hole pattern drilled for Naze, CC3D, SP F3 Acro Cleanflight boards, it will take most 1806/2204 motors and is designed to run 4045 Bullnose props. The top plate has also been cut to house all your important electronics with the dual camera mount design at the front which can now take the HS1177 package and a hole at the rear for you VTX antenna to pop through and clamp in securely. Easy accessed and mounting points for your receiver with aerial holes to keep that RSSI at bay. The top plate is designed to mount these components on the underside of it with convenient zip tie slots as space is tight.
The machine was designed, cut and tested by Rotortronics in Scotland. (UK)
This frame is only available here.
What you get in the package:-
1x 3mm 3k Twill Carbon Fibre Mono Body
1x 1.5mm 3k Twill Carbon Fibre Top Plate
1x 3mm 3k Twill Carbon Fibre Cam Plate
1x Kooltoyz Battery Strap
8x M3 25mm Male/Male Nylon Standoffs
16x M3 8mm Button Head Stainless Steel screws
4x M3 10mm Steel Male/Female Stand off's
3mm 3K Twill Carbon Fibre Mono Body
1.5mm 3K Twill Carbon Fibre Top Plate
Weight:- 92 Grams (With Standoffs & Hardware)
BNF Version will also be available soon!
NAZE REV 6
LITTLE BEE 20A PRO
700TVL CCD/ HS117
MINI SKYZONE VTX (Mw Clasified)
GENS ACE 1550 75C (Grrrrr)
|SKU||MIDGE 180 RS|
|Private Event||Use Category Settings|
|Private Event Landing Page||------------------------------|