The Midge 180 V2 4mm Frame RTF Version
- Click Logo for All
The Midge 180 Frame 4mm RTF
Battery charger required
This is our Midge 180 V2 RTF version fully built, setup, flown and tuned in house, just ready to switch on and fly.
The Midge 180 V2 mini FPV racing frame has evolved from our popular V1 design.
A unique single piece MONO body cut from 100% real 3K twill 4mm carbon fibre sets the Midge 180 apart from the rest. Topped off with a tough 1.5mm carbon fibre top plate and super tough 4mm Cam plate, we havent left anything for the customers to work out. We now have 8x 25mm standoff's so the rear off the top plate can no longer snap. Running 25mm standoffs gives the Midge a real low rider look and the ability to get through gaps 250's can only dream off. A full hardware kit with proper stainless steel screws for the build is also supplied as well as a kooltoyz battery strap.
The frame has been designed with common parts in mind and has 36mm flight controller hole pattern drilled for Naze, CC3D, SP F3 Acro Cleanflight boards, it will take most 1806/2204 motors and is designed to run 4045 Bullnose props. The top plate has also been cut to house all your important electronics with the dual camera mount design at the front which can now take the HS1177 package and a hole at the rear for you VTX antenna to pop through and clamp in securely. Easy accessed and mounting points for your receiver with aerial holes to keep that RSSI at bay. The top plate is designed to mount these components on the underside of it with convenient zip tie slots as space is tight.
The machine was designed, cut and tested by Rotortronics in Scotland. (UK)
This frame is only available here.
What you get in the package:-
Flysky i6S Transmitter
Flysky FS-A8S Reciever (S.Bus)
KAKUTE A10 F3 OSD PDB
EMAX RS2205 2300KV Race Motors (4)
EMAX 30A Oneshot ESC's (4)
4045 Bullnose Props (2 Sets)
Acehe 1300mAH 75C 4S LiPo Battery (1)
FOXEER Switchable VTX
Emax 800 TVL FPV Camera 2.5mm Lens
4mm 3K Twill Carbon Fibre Mono Body
1.5mm 3K Twill Carbon Fibre Top Plate
Weight:- 120 Grams (With PDB/XT60/HARDWARE)
Weight all up inc lipo 438g
|SKU||Midge 180 V2 RTF|
|Private Event||Use Category Settings|
|Private Event Landing Page||Login Page|