Seriously Pro SP Racing F3 EVO
The Seriously Pro Racing F3 EVO (SPRacingF3EVO) is the third flight controller designed specifically for Cleanflight. It is the only wallet-friendly FC that supports all the latest Cleanflight features in a standard 36x36mm mounting holes. With the new transponder feature it is truly race ready.
Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core.
MicroSD-Card socket for black box flight log recorder - optimize your tuning and see the results of your setup without guesswork.
Race transponder built in - just turn up at a race and have your lap Times recorded.
Features the latest Accelerometer, Gyro and Mag/Compass and Baro/Altitude sensor technology connected via the fast SPI bus.
Wire up using using pin headers for all major connections for excellent crash-durability. Use either right-angled or straight pin-headers.
No compromise I/O. Use all the features all the time; e.g. Connect your USB + OSD + SmartPort + SBus + LED Strip + Battery Monitoring + 8 motors - all at the same time!
8 PWM output lines for ESCs and Servos. Arranged for easy wiring on standard pin headers.
Supports direct connection of SBus, SumH, SumD, Spektrum1024/2048, XBus receivers. No external inverters required (built-in). PWM 1 wire per channel receivers not supported.
Supports direct connection of 3.3v Spektrum Satellite receivers via 3 pin through-hole JST-ZH connector.
3 Serial Ports - NOT shared with the USB socket.
Micro USB socket.
Dedicated output for programmable LEDs - great for orientation, racing and night flying. (Currently mutually exclusive with the Transponder).
Dedicated I2C port for connection of OLED display without needing flight battery.
Battery monitoring for voltage and current.
RSSI monitoring (analog or PWM).
Buzzer port for audible warnings and notifications.
Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
Symmetrical design for a super tidy wiring.
JST-SH sockets for I2C/UART2 and SWD. UART2 also available on through-holes.
Flashing via USB or serial port.
Stackable design - perfect for integrating with OSDs and power distribution boards.
Standard 30.5mm mounting holes.
LEDs for 3v, 5v and Status for easy diagnostics.
Copper-etched Cleanflight logo.
SPRacingF3EVO flight controller including accelerometer, gyro, altiude and heading sensors (barometer and compass, 10DOF)
Pin headers (right-angled and straight, black)