RunCam Swift Mini FPV camera
The New RunCam Swift Mini is much smaller than its predecessor, its Ultra compact design and new PCB brings it down to 22.3mm x 22mm x 27mm so if space is tight then this camera is perfect, with all the same features as the normal swift, 600TVL SONY Super HAD II CCD image sensor (1/3″)
Thanks to the wide input voltage range, this Runcam Swift Mini can be used with up to 9s Li-Po batteries (36V).
Note: if you want to use it with 1s Li-Po (3.7V) you will need a 3.7v to 5v boost converter.
On the backside of the camera there are two connectors. Through the two-pin plug it can be connected with the included OSD cable which allows to configure and fine tune the Swift Mini camera. The second connector(5-36V, GND and Video) allows to power the camera and connect to a wireless image transmission module (5.8G VTX).
RunCam Swift Mini features and specs
SONY Super HAD II CCD image sensor (1/3″);
600TVL horizontal resolution;
Optional 2.5mm, 2.3mm or 2.1mm lens; Supplied with 2.5mm
Wide input voltage rage, DC 5V to 36V;
Excellent light senility, 0.01Lux/1.2F min. illumination;
Electronic shutter speed for NTSC video standard is 1/60 to 1/100,000sec;
Digital Wide Dynamic Range (D-WDR);
Digital Noise Reduction (2DNR);
Auto Day/Night mode;
CVBS (RCA) video output for real-time image transmission:
Ultra compact design, 22.3mm x 22mm x 27mm;
12g net weight.