RunCam Swift Mini FPV Camera 2.3mm
RunCam Swift Mini FPV camera
The New RunCam Swift Mini is much smaller than its predecessor, its Ultra compact design and new PCB brings it down to 22.3mm x 22mm x 27mm so if space is tight then this camera is perfect, with all the same features as the normal swift, 600TVL SONY Super HAD II CCD image sensor (1/3″)
Thanks to the wide input voltage range, this Runcam Swift Mini can be used with up to 9s Li-Po batteries (36V).
Note: if you want to use it with 1s Li-Po (3.7V) you will need a 3.7v to 5v boost converter.
On the backside of the camera there are two connectors. Through the two-pin plug it can be connected with the included OSD cable which allows to configure and fine tune the Swift Mini camera. The second connector(5-36V, GND and Video) allows to power the camera and connect to a wireless image transmission module (5.8G VTX).
RunCam Swift Mini features and specs
SONY Super HAD II CCD image sensor (1/3″);
600TVL horizontal resolution;
Optional 2.5mm, 2.3mm or 2.1mm lens; Supplied with 2.3mm
Wide input voltage rage, DC 5V to 36V;
Excellent light senility, 0.01Lux/1.2F min. illumination;
Electronic shutter speed for NTSC video standard is 1/60 to 1/100,000sec;
Digital Wide Dynamic Range (D-WDR);
Digital Noise Reduction (2DNR);
Auto Day/Night mode;
CVBS (RCA) video output for real-time image transmission:
Ultra compact design, 22.3mm x 22mm x 27mm;
12g net weight.
|SKU||RUN SWIFT MIN 2.3|