[email protected] Need Help? Call us on: 0131 663 3377

QAV 210 4mm Frame,Racing Drone Kit

Special Price £181.99 Regular Price £219.99
Out of stock
SKU
PNP-3
QAV 210 4mm X Frame,Racing Drone Kit with FPV

QAV 210 4mm Carbon Fiber Frame, Racing Drone Kit

EMAX 2300-S Motors, Emax Bullet 30A ESC,F3 FC,Matek PDB,DAL Props

We have put together a full racing Kit for the QAV X210 frame

QAV 210 4mm Carbon Fiber Frame

Seriously Pro SP Racing F3 EVO

4x Emax RS2205S 2300KV Racing Edition Brushless Motor

4x Emax Bullets 30A BLHELI_S ESC

MATEK SYSTEMS MINI POWER PDB HUB WITH DUAL 5V 12V BEC

14AWG wire with xt60

Dal 5045 bullnose propellers x8

KOOLTOYZ Rubberised battery strap

QAV 210 4mm Carbon Fiber Frame

CHARPU Clone

Designed for and named after one of the top FPV pilots in the world, the new  QAV210 CHARPU Carbon Fibre FPV Quadcopter airframe is CHARPU's new go to frame for acrobatic FPV sessions.

The QAV210 CHARPU is an extended version of the new QAV180 FPV quad kit . The QAV210 CHARPU is designed to be the smallest possible airframe while comfortably supporting 5" props and 220X size motors. The assembled kit containing Carbon Fibre Plates, Power Distribution Board and all hardware weighs in at only 91g. 

Seriously ProSP Racing F3 EVOFLIGHT CONTROLLER

The Seriously Pro Racing F3 EVO (SPRacingF3EVO) is the third flight controller designed specifically for Cleanflight. It is the only wallet-friendly FC that supports all the latest Cleanflight features in a standard 36x36mm mounting holes. With the new transponder feature it is truly race ready.

FEATURES

Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core.

MicroSD-Card socket for black box flight log recorder - optimize your tuning and see the results of your setup without guesswork.

Race transponder built in - just turn up at a race and have your lap Times recorded.Features the latest Accelerometer, Gyro and Mag/Compass and Baro/Altitude sensor technology connected via the fast SPI bus.Wire up using using pin headers for all major connections for excellent crash-durability. Use either right-angled or straight pin-headers.

No compromise I/O. Use all the features all the time; e.g. Connect your USB + OSD + SmartPort + SBus + LED Strip + Battery Monitoring + 8 motors - all at the sametime!

8 PWM output lines for ESCs and Servos. Arranged for easy wiring on standard pin headers.Supports direct connection of SBus, SumH, SumD, Spektrum1024/2048, XBus receivers. No external inverters required (built-in). PWM 1 wire per channel receivers not supported.

Supports direct connection of 3.3v Spektrum Satellite receivers via 3 pin through-hole JST-ZH connector.3 Serial Ports - NOT shared with the USB socket.Micro USB socket.

Dedicated output for programmable LEDs - great for orientation, racing and night flying. (Currently mutually exclusive with the Transponder).

Dedicated I2C port for connection of OLED display without needing flight battery.Battery monitoring for voltage and current.RSSI monitoring (analog or PWM).

Buzzer port for audible warnings and notifications.

Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.Symmetrical design for a super tidy wiring.JST-SH sockets for I2C/UART2 and SWD.

UART2 also available on through-holes.Flashing via USB or serial port.Stackable design - perfect for integrating with OSDs and power distribution boards.

Standard 30.5mm mounting holes.LEDs for 3v, 5v and Status for easy diagnostics.Copper-etched Cleanflight logo.

4x Emax RS2205S 2300KV Racing Edition Brushless Motor

The completely redesigned RS2205-S is upgraded with features racing multirotors absolutely need. The motor is lighter, yields faster bell rotational response, higher thrust, uses premium materials and backed with EMAX's legendary production quality.

2 grams lighter than the first version of the RS2205, the RS2205-S is a 2205 motor which has been overhauled for the weight conscious racer. The bell has been redesigned to have a lower profile without sacrificing the structural integrity of the motor. This eliminates unnecessary mass and allows quicker rotational response of the bell. The shorter motor height allows a lower center of gravity closer to the mounting point.

4x Emax Bullets 30A BLHELI_S ESC

The market's lightest and smallest ESC, designed specifically for high-level FPV racing. Utilizing the latest BLHeli-S firmware (16.5), hardware PWM generates a signal to boost smoother throttle response and reduce noise.

FEATURES

The market's lightest and smallest ESC, designed specifically for high-level FPV racingWith the latest firmware BLHeli - S (16.5), the hardware generates a signal to boost smoother and quieter throttle responseSupports new digital signal DShot150, DShot300, DShot600 as well as analog signals including Multishot, Oneshot42, Oneshot125

With high-quality MOSFET and Japanese ceramic capacitors, the 3oz high TG PCB board significantly improves heat dissipation and system efficiency

New heat sink design effectively reduces the core temperature, and protects against prop strike damage,Thermal stable silicone signal cable, flexible and easy to install

Imported MOS tube,Japanese ceramic capacitors, 3oz High-TG PCB board, significantly reduces electrical heat soak and improves system efficiency

SPECIFICATIONS

Continuous current: 30ABurst

current: 35A

Voltage input: 2 - 4S LiPo

Dimensions: 11.9 x 19.6mm

Weight: 3.9g

MCU: EFM8BB2

BEC: no

MATEK SYSTEMS MINI POWER PDB HUB WITH DUAL 5V 12V BEC

Included 90 degree XT60 Connector

The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised regulated DC 5V outputs linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.

It offers a XT60 socket to connect the LiPo pack conveniently.

2x DAL 5045 V2 Bullnose Props

Perfect for your 210+ sized mini racing drone! V2 5045 Bullnose props will provide smooth flight while providing more than enough power for punch outs.

PC + glass fiber material is made of a high quality, flexible and durable plastic that can easily survive crashes and tree clips.

DAL Props are much stronger than other 4,5,6 Props like Gemfan, HQProps and others V2 5045 Bullnose have a thicker hub connection, which is perfect for racing.V2 also spin at higher RPMs

2 PACKS = 8 PROPS 4x CW + 4x CCW

More Information
SKU PNP-3
Is Featured No
Private Event Use Category Settings
Private Event Landing Page Login Page
Write Your Own Review
You're reviewing:QAV 210 4mm Frame,Racing Drone Kit
Your Rating