QAV X210 4mm X Frame,Racing Drone Kit

More Views

  • QAV X210 4mm X Frame,Racing Drone Kit
  • QAV X210 4mm X Frame
  • QAV X210 4mm X Frame,Racing Kit
  • QAV X210 4mm X Frame kIT
  • QAV X210 4mm X Frame,Racing Drone Kit,
  • Emax 30 Bullet ESC's
  • QAV X210 4mm X Frame,Racing Drone Kit, 4 EMAX 2300 S Motors, ESC,F3 FC,PDB,Props
  • EVO FC Flight controller
  • QAV X210 4mm X Frame,Racing Drone Kit
  • QAV X210 4mm X Frame,Racing Drone Kit
QAV X210 4mm X Frame,Racing Drone Kit

Availability: Out of stock

QAV X210 4mm X Frame,Racing Drone Kit

sku: PNP-1

Click Logo for All

Regular Price: £200.00

Special Price £173.99

+Add to Wishlist

QAV X210 4mm X Frame, Racing Drone Kit

EMAX 2300-S Motors,Emax Bullet 30A ESC,F3 FC,Matek PDB,DAL Props

We have put together a full racing Kit for the QAV X210 frame

QAV X210 4mm Carbon Fiber X Frame

Seriously Pro SP Racing F3 EVO CLONE

4x Emax RS2205S 2300KV Racing Edition Brushless Motor

4x Emax Bullets 30A BLHELI_S D-Shot ESC


14AWG wire with xt60

Dal 5045 bullnose propellers x8

KOOLTOYZ Rubberised battery strap


The QAV X210 is built for racing. A symmetrical X, light weight, super stiff frame designed for high performance FPV Drone Racing. Features:Full 3K Carbon Fiber frame.Optional 3mm or 4mm frame arms.Dual purpose FPV and HD camera mounting solution.Compact size for 5" propellers, 214mm motor to motor.Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).LiPo battery protection plate included.Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc).Lightweight and rigid


The Seriously Pro Racing F3 EVO (SPRacingF3EVO) is the third flight controller designed specifically for Cleanflight. It is the only wallet-friendly FC that supports all the latest Cleanflight features in a standard 36x36mm mounting holes. With the new transponder feature it is truly race ready.


Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core.

MicroSD-Card socket for black box flight log recorder - optimize your tuning and see the results of your setup without guesswork.

Race transponder built in - just turn up at a race and have your lap Times recorded.

Features the latest Accelerometer, Gyro and Mag/Compass and Baro/Altitude sensor technology connected via the fast SPI bus.

Wire up using using pin headers for all major connections for excellent crash-durability. Use either right-angled or straight pin-headers.No compromise I/O. Use all the features all the time; e.g.

Connect your USB + OSD + SmartPort + SBus + LED Strip + Battery Monitoring + 8 motors - all at the same time!8 PWM output lines for ESCs and Servos. Arranged for easy wiring on standard pin headers.

 4x Emax RS2205S 2300KV Racing Edition Brushless Motors

The completely redesigned RS2205-S is upgraded with features racing multirotors absolutely need.

The motor is lighter, yields faster bell rotational response, higher thrust, uses premium materials and backed with EMAX's legendary production quality.

Lighter and Lower Profile 2 grams lighter than the first version of the RS2205, the RS2205-S is a 2205 motor which has been overhauled for the weight conscious racer. The bell has been redesigned to have a lower profile without sacrificing the structural integrity of the motor.

This eliminates unnecessary mass and allows quicker rotational response of the bell. The shorter motor height allows a lower center of gravity closer to the mounting point.

4x Emax Bullets 30A BLHELI_S ESC

The market's lightest and smallest ESC, designed specifically for high-level FPV racing.

Utilizing the latest BLHeli-S firmware (16.5), hardware PWM generates a signal to boost smoother throttle response and reduce noise.


The market's lightest and smallest ESC, designed specifically for high-level FPV racingWith the latest firmware BLHeli - S (16.5), the hardware generates a signal to boost smoother and quieter throttle response

Supports new digital signal DShot150, DShot300, DShot600 as well as analog signals including Multishot, Oneshot42, Oneshot125

With high-quality MOSFET and Japanese ceramic capacitors, the 3oz high TG PCB board significantly improves heat dissipation and system efficiency

New heat sink design effectively reduces the core temperature, and protects against prop strike damage

Thermal stable silicone signal cable, flexible and easy to installImported MOS tube, Japanese ceramic capacitors, 3oz High-TG PCB board, significantly reduces electrical heat soak and improves system efficiency


Continuous current: 30A

Burst current: 35A

Voltage input: 2 - 4S LiPo

Dimensions: 11.9 x 19.6mm

Weight: 3.9g


BEC: no


Included 90 degree XT60 Connector The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised regulated DC 5V outputs linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It offers a XT60 socket to connect the LiPo pack conveniently.

2x DAL 5045 V2 Bullnose Props

Perfect for your 210+ sized mini racing drone! V2 5045 Bullnose props will provide smooth flight while providing more than enough power for punch outs. PC + glass fiber material is made of a high quality, flexible and durable plastic that can easily survive crashes and tree clips. DAL Props are much stronger than other 4,5,6 Props like Gemfan, HQProps and others V2 5045 Bullnose have a thicker hub connection, which is perfect for racing.V2 also spin at higher RPMs

2 PACKS = 8 PROPS 4x CW + 4x CCW