[email protected] Need Help? Call us on: 0131 663 3377

QAV-R 220 4mm X Frame,Racing Drone Kit

Special Price £173.99 Regular Price £200.00
Out of stock
QAV-R 220 4mm X Frame,Racing Drone Kit

QAV-R 220 4mm X Frame,Racing Drone Kit 

EMAX 2300-S Motors, Emax Bullet 30A ESC,F3 FC,Matek PDB,DAL Props

We have put together a full racing Kit for the QAV X210 frame

QAV-R 220 4mm Carbon Fiber X Frame

Seriously Pro SP Racing F3 EVO

4x Emax RS2205S 2300KV Racing Edition Brushless Motor

4x Emax Bullets 30A BLHELI_S ESC


14AWG wire with xt60

Dal 5045 bullnose propellers x8

KOOLTOYZ Rubberised battery strap

QAV-R 220 Clone

The QAV-R CLONE FPV racing quadcopter 5" airframe kit is a finely tuned airframe designed for high performance FPV Drone Racing pilots. The carbon fiber airframe is lightweight and very stiff for the most precise and fastest posible flights. The QAV-R has a strong carbon fiber bottom plate, thick 2mmTop Plate and 4mm thick removable arms, giving you the best of both durability and performance.


Full 3K Carbon Fiber airframe featuring a solid 2mm main plate and 4mm removable arms

Aluminum hardware to enable one tool, quick swapping of arms in race pit settings

Easy grip anodized spacers Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).

Flight controller cover plate includes cutouts for SMA connector and video transmitter as well as a holder for the included XT-60 Lipo pig-tail.

Easy Lipo Access (suggested Lipo is a 1300mah 3 or 4s) Support for 32mm board cams as well as 26mm cams in cases.

Support to carry HD camera (such as the GoPro 4, Mobius, or GoPro Session) with optional camera vibration mount (not included) Weight Airframe: 99g (airframe + hardware).


The Seriously Pro Racing F3 EVO (SPRacingF3EVO) is the third flight controller designed specifically for Cleanflight. It is the only wallet-friendly FC that supports all the latest Cleanflight features in a standard 36x36mm mounting holes. With the new transponder feature it is truly race ready.


Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core.

MicroSD-Card socket for black box flight log recorder - optimize your tuning and see the results of your setup without guesswork.

Race transponder built in - just turn up at a race and have your lap Times recorded.Features the latest Accelerometer, Gyro and Mag/Compass and Baro/Altitude sensor technology connected via the fast SPI bus.Wire up using using pin headers for all major connections for excellent crash-durability. Use either right-angled or straight pin-headers.

No compromise I/O. Use all the features all the time; e.g. Connect your USB + OSD + SmartPort + SBus + LED Strip + Battery Monitoring + 8 motors - all at the sametime!

8 PWM output lines for ESCs and Servos. Arranged for easy wiring on standard pin headers.Supports direct connection of SBus, SumH, SumD, Spektrum1024/2048, XBus receivers. No external inverters required (built-in). PWM 1 wire per channel receivers not supported.

Supports direct connection of 3.3v Spektrum Satellite receivers via 3 pin through-hole JST-ZH connector.3 Serial Ports - NOT shared with the USB socket.Micro USB socket.

Dedicated output for programmable LEDs - great for orientation, racing and night flying. (Currently mutually exclusive with the Transponder).

Dedicated I2C port for connection of OLED display without needing flight battery.Battery monitoring for voltage and current.RSSI monitoring (analog or PWM).

Buzzer port for audible warnings and notifications.

Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.Symmetrical design for a super tidy wiring.JST-SH sockets for I2C/UART2 and SWD.

UART2 also available on through-holes.Flashing via USB or serial port.Stackable design - perfect for integrating with OSDs and power distribution boards.

Standard 30.5mm mounting holes.LEDs for 3v, 5v and Status for easy diagnostics.Copper-etched Cleanflight logo.

4x Emax RS2205S 2300KV Racing Edition Brushless Motor

The completely redesigned RS2205-S is upgraded with features racing multirotors absolutely need. The motor is lighter, yields faster bell rotational response, higher thrust, uses premium materials and backed with EMAX's legendary production quality.

2 grams lighter than the first version of the RS2205, the RS2205-S is a 2205 motor which has been overhauled for the weight conscious racer. The bell has been redesigned to have a lower profile without sacrificing the structural integrity of the motor. This eliminates unnecessary mass and allows quicker rotational response of the bell. The shorter motor height allows a lower center of gravity closer to the mounting point.

4x Emax Bullets 30A BLHELI_S ESC

The market's lightest and smallest ESC, designed specifically for high-level FPV racing. Utilizing the latest BLHeli-S firmware (16.5), hardware PWM generates a signal to boost smoother throttle response and reduce noise.


The market's lightest and smallest ESC, designed specifically for high-level FPV racingWith the latest firmware BLHeli - S (16.5), the hardware generates a signal to boost smoother and quieter throttle responseSupports new digital signal DShot150, DShot300, DShot600 as well as analog signals including Multishot, Oneshot42, Oneshot125

With high-quality MOSFET and Japanese ceramic capacitors, the 3oz high TG PCB board significantly improves heat dissipation and system efficiency

New heat sink design effectively reduces the core temperature, and protects against prop strike damage,Thermal stable silicone signal cable, flexible and easy to install

Imported MOS tube,Japanese ceramic capacitors, 3oz High-TG PCB board, significantly reduces electrical heat soak and improves system efficiency


Continuous current: 30ABurst

current: 35A

Voltage input: 2 - 4S LiPo

Dimensions: 11.9 x 19.6mm

Weight: 3.9g


BEC: no


Included 90 degree XT60 Connector

The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised regulated DC 5V outputs linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.

It offers a XT60 socket to connect the LiPo pack conveniently.

2x DAL 5045 V2 Bullnose Props

Perfect for your 210+ sized mini racing drone! V2 5045 Bullnose props will provide smooth flight while providing more than enough power for punch outs.

PC + glass fiber material is made of a high quality, flexible and durable plastic that can easily survive crashes and tree clips.

DAL Props are much stronger than other 4,5,6 Props like Gemfan, HQProps and others V2 5045 Bullnose have a thicker hub connection, which is perfect for racing.V2 also spin at higher RPMs

2 PACKS = 8 PROPS 4x CW + 4x CCW

More Information
Is Featured No
Private Event Use Category Settings
Private Event Landing Page Login Page
Write Your Own Review
You're reviewing:QAV-R 220 4mm X Frame,Racing Drone Kit
Your Rating