[email protected] Need Help? Call us on: 0131 663 3377

Shendrones Orca 5" Racing Drone RTF

Special Price £299.99 Regular Price £400.00
In stock
SKU
Orca RTF
Custom Build Orca Racing Drone RTF
Shendrones Orca 5" Racing Drone RTF is available to buy in increments of 1

ORCA 5" RACING DRONE RTF

A custom built high spec racing drone fitted with the following parts, setup and ready to go. Includes transmitter and 1 battery, will require a battery charger to complete. (Also available)

FRAME (Shendrones Orca)
The Orca is a collaboration with Raceflight, featuring their long frame concept and its superior flight characteristics. The frame is 215mm, for 5″ props, with a 4mm base plate. The canopy is 3d printed TPU, cam mounts for Hero, Session, and Mobius/Runcam/Foxeer are available as well. 

FLIGHT CONTROLLER (Kakute F3)

The F3 Flight Controller, “Kakute” is named after ancient Japanese fighting rings, forged from steel, adorned with four metal spikes for attacking the enemy when least expected, favoured by the Kunoichi Ninjas.

The Full Metal Racing “Kakute” is a full featured F3 flight controller, with easy solder pad connections, standard 36x36mm layout, 6050 MPU which is less susceptible to high frequency vibration, high voltage input (up to 6s with ability to cope with up to a 42V spike) on-board regulated 5V 1A BEC for powering the flight controller, FPV camera and rx.

ELECTRONIC SPEED CONTROLLERS (Emax BLHeli_S 35A)
With the latest firmware BLHeli - S (16.5), the hardware generates a signal to boost smoother and quieter throttle response
Supports  Multishot, Oneshot42, Oneshot125
With high-quality MOSFET and Japanese ceramic capacitors, the 3oz high TG PCB board significantly improves heat dissipation and system efficiency

BRUSHLESS MOTORS (TBS Masterpilot Pro's 2400Kv)

The TBS MasterPilot is a force to be reckoned with, not just for its performance, but its wallet saving price.

We set out to design an economic, bottom-less FPV motor for the racing crowd. The Pro line comes with a steel shaft and no c-clip. It's a motor to get you started in FPV or to allow you to practice without regrets.

FPV CAMERA (Foxeer HS1177)
It is a classic FPV camera on the market, Foxeer company's famous product, it adopts 1/3 Sony Super HAD II CCD and Nextchip 2040 DSP, minimum illumination reach 0.01Lux(B/W), powerful OSD programming cable, compact design, low light, fantastic WDR make it great from dark to bright, black to dark, it is one of the best cameras for FPV.

VIDEO TRANSMITTER (Rush VTX >800mW)
The newest Rush VTX by Star Power is specifically designed for racing. 
Why is it so awesome? You can change channels and power while being in PIT mode so your not interfering with anyone else. 
The slimline MMCX connector makes it easy to mount and releases the pressure off the coax cable. 

How to mount it? Stack it on top of your PDB/FC because it has a 30.5x30.5 mount solution. 

RECEIVER (FlySky FS-A8S)

Flysky has finally released a really tiny receiver for the tiny whoop size quads weighing in at a 1.2g , yes 1.2g its super light and also works with the turnigy evolution transmitter. The FS-A8S is a compact 1-way receiver designed for multi-rotor aircraft. It uses the AFHDS 2A(Automatic Frequency Hopping Digital System) protocol, supports standard PPM output and has i-BUS support for up to 18 channels. 

ANTENNA (Foxeer Lollipop V2)

The lollipop 2 antennas now come in a tiny stubby form. Perfect for those looking to save space and improve durability. This little guy is miniscule, but performs just as well as the regular sized versions.

PROPELLERS (DalProp T5249C 4 Sets) 

Dalprop newly released CYCLONE T5249C propeller has a faster response time without compromising manoeuvrability, they are more efficient and will increase flight time. These  Dal Tri- Blade Props will change your flying forever with a redesigned blade scoop that improves cornering and makes your turns feel much more locked in with the added advantage of producing less prop wash.

BATTERY (Tattu 4S 1300mAh 1pcs)

This is  new range of Lipo Battery's from Gens Ace  TATTU, designed specifically for FPV racing drones with high discharge capacity.

TRANSMITTER (Flysky FS-I6S)

The FlySky FS-i6S is a 6 channel (PWM) or a 10 channel (PPM) 2.4GHz AFHDS Digital Proportional RC system and comes complete with the new FS-8AS Reciever PPM, S.Bus, PWM receiver.

The new look design comes with some exciting new features. This radio incorporates a monochrome backlit LCD touchscreen making it easy to program and make changes in sunlight or at night. There are two internal dual omnidirectional high gain antennas (for more reliability) built inside the frame so they can’t be damaged in transit. To help control your aircraft there are lots of programmable switches, buttons and scroll wheels. Making them great for setting up flight modes and the scroll wheels could be used for controlling camera gimbals.



More Information
SKU Orca RTF
Is Featured Yes
Private Event Use Category Settings
Private Event Landing Page Login Page
Write Your Own Review
You're reviewing:Shendrones Orca 5" Racing Drone RTF
Your Rating