MATEK LED & POWER HUB 5in1 V3 Power Supply Board
- Click Logo for All
- matek Systems
Matek LED & POWER HUB 5in1 V3 Power Supply Board BEC 5V 12v
+ Low Voltage Alarm + Tracker
The 5 in 1 V3 system has been engineered to provide the highest possible performance and reliability in a 46 x 36mm sized PCB. The 5 in 1 system combines a printed distribution board (PDB) with 5v-3A / 12v-500mA BEC, LED light controller, lost model finder and low voltage alarm functions.
The 5 in 1 system has been specifically designed for use with 250 sized racers, though its is also suitable for larger multirotors. The built-in 5v BEC can be connected to receiver or flight controller with aux pins directly to simplify your set up. The 12v BEC can be used to power the camera and video transmitters.
The built-in 5v LED light controller has 3 light modes which can be set up to change with the toggle switch on your transmiter. The lost model buzzer can also be triggered with the toggle switch making it super easy to find your multirotor in the event of an incident. The 5 in 1 system also acts as a battery voltage monitor. Once voltage gets below the set threshold the audible buzzer & LED light will remind you.
• 5 in 1 function
• Compact & light weight
• 2oz copper & 4 layered PCB design
• Paired ESC & battery solder tabs
• BEC 5v & 12v output LED indicators
• TVS input protection
Input Voltage Range: 7~26v DC, 2~6 Cell LiPoly
Dimensions: 36 x 36 x 6mm
Mounting: 30.5mm, F3mm
1 x 5 in 1 power system
1 x Nylon fixing set
1 x Jumper cable
|SKU||MATEK 5IN1 V3|
|Private Event||Use Category Settings|
|Private Event Landing Page||------------------------------|