[email protected] Need Help? Call us on: 0131 663 3377

Matek PDB-XPW 5V 12V Dual BEC PDB

Special Price £7.49 Regular Price £9.99
Out of stock
Matek PDB-XPW 5V 12V Dual BEC PDB

Matek PDB-XPW 5V 12V Dual BEC PDB

The PDB-XPW from Matek Systems distributes power from a Lipo pack to 4 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering cameras, RC receivers, flight contollers, video transmitters and LEDs etc. The Matek PDB-XPW also has a built-in 140A current module, offers a XT60PW socket to connnect the LiPo pack conveniently.


2 oz copper, 4 layers & 2mm PCB.
Built-in current sensor 140A
Built-in XT60PW socket.
Total 4 pairs ESC solder tabs are fit for X-Type frames.
5V & 12V output LED indicators & short circuit totelrant.


Input voltage range (3S-5S LiPo operation): 9 - 21V DC
PDB: 4 x 35A
Regulated 5V and 12V outputs
Current module 150A
LED power indicators ( 5V & 12V outputs )

Current Module
3.3V ADC

BEC 5V output:
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, [email protected] load)
Short-circuit tolerant (5 seconds/minute)

BEC 12V output:
Designed for Video TX or FPV camera with linear regulator.
The battery should be 4~5S LiPo (13~21V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant (2 seconds/minute)

BEC 12V @ 3S LiPo
Output voltage= 3S LiPo voltage -1V

Mounting: 30.5 x 30.5mm, Φ3mm
Dimensions: 36 x 50 x 4 mm (w/o XT60PW), 36 x 58 X10.5mm (w/ XT60PW)
Weight: 7.0g(w/o XT60PW), 11g(w/ XT60PW)


Nylon Standoff (Nuts, Screws, standoffs)

More Information
Is Featured No
Private Event Use Category Settings
Private Event Landing Page Login Page
Write Your Own Review
You're reviewing:Matek PDB-XPW 5V 12V Dual BEC PDB
Your Rating