LaForge Diversity FatShark Module V4 with Molded Door
- Click Logo for All
LaForge Diversity FatShark Module
INCLUDES THE MOULDED DOORS IN WHITE
The Diversity Module is an additional 5.8GHz receiver with status LEDs buzzer and wiring harness.
Adding a secondary receiver gives another layer of reliability and allows for different types of antennas to be used simultaneously so you can feel confident you are getting the best signal. Finally a Fat Shark diversity module that works.
When plugged into the Main Module, the Diversity Module is automaticly detected and ready to use without any firmware flashing.
Version 4 Diversity module is required with the v4 Main Module in order to utilize the speaker. If you choose not to upgrade your diversity module you will need to remove the speaker from the v2 or Lower Diversity module
Indicates power and active antenna.
Acoustic feedback of status.
10cm in length.
Plug & Play
No firmware updates necessary.
1x LaForge Diversity Module v4
1x Diversity Module Molded door
1x 45° SMA
1x Diversity Crossover cable
* A few users have reported burnt ribbon cables while using the Diversity Module. In all instances these goggles were opened up or modified in some way. LaForge FPV do not reccomend modding your goggles. Modding your goggles will void your fat shark warranty. User installs Diversity Module at their own risk.
|SKU||LAFORGE DIV MOD V4|
|Private Event||Use Category Settings|
|Private Event Landing Page||Login Page|