EMAX LS2206 2300kv LITE SPEC BRUSHLESS MOTOR (CW THREAD)
- Click Logo for All
- EMAX Model
EMAX LS2206 LITE SPEC BRUSHLESS MOTOR (CW THREAD)
The Emax LS line of brushless fpv drone motors are changing the motor game yet again! Whether you're a racer or a freestyle pilot, there is a LS motor for to fit your flying style and power needs. "LS" stands for light spec, and EMAX spent countless hours of research and development to produce a motor that is lightweight for its class, powerful, and durable.
The LS series offers two different sized stators (2206 & 2207), and a wide kV range to meet each pilots unique needs.
A completely different bell design has been manufactured that incorporates upper and lower beam support, which reduces damage from impacts after a crash. The bells are anodized with a sleek stealth black color, and feature a silver beveled edge for exquisite aesthetic looks.
The mounting base has also been slightly redesigned. By reducing the size to 16x16 mounting pattern, EMAX was not only able to shed weight in this area, but additionally reduce the risk of shorting out the windings when mounting the motors with long screws.
Internal construction consists of NSK high efficiency bearings, a stator that features 0.15mm silicon steel laminations, 1.8mm N48SH arc magnets, are all a complete package to provide the pilot with these two goals: incredible power and optimum efficiency. Lastly, now utilizing 18AWG wire, EMAX discovered that by using larger guage wires, a 5% increase in performance was gained in comparison to standard 20AWG wire.
NSK high efficiency bearings
0.15mm silicon steel laminations
Aluminum shaft with hardened steel core
1.8mm N48SH ARC Magnets
Screw capture for bell. Easy to service
Stealth black anodized color, with silver beveled edges
Reduced base size. Lower the weight and easier to make sure not to short your wires with long screws.
16mm x 16mm mounting holes ( 19x16 is the past) future frames don’t need to have slotted mounting holes.
120mm 18AWG wire. Testing has shown a 5% increase in performance with thicker gauged wire. Compared from 20AWG wire.
New bell design with upper and lower beam support to reduce damage from collapse of impacts.
Input Voltage: 3-5S LiPo (11.1-18.5V)
Prop Size: 5 Inch
Weight (W/O wires): 28g
Included in the Box:
• 1x motor
• 5x 3mm arm mounting screws
• 5x 4mm arm mounting screws
• 1x replacement bell housing screw
• 1x replacement bell housing washer
• 1x EMAX Stickers
|SKU||EMAX LS2206 2300kv|
|Private Event||Use Category Settings|
|Private Event Landing Page||Login Page|