[email protected] Need Help? Call us on: 0131 663 3377

EMAX F4 Magnum AIO FPV Stack

Special Price £85.99 Regular Price £89.99
Out of stock
EMAX F4 Magnum AIO FPV Stack

EMAX F4 Magnum AIO FPV Stack

F4 Flight Controller 4 In 1 BLHeli-S Bullet 30A ESC VTX FrSky XM+ Receiver And Antenna

This tightly integrated systems packs the FC, ESC, RX, VTX, PDB, CURRENT SENSOR and OSD into neatly stacked boards that can be easily serviced or upgraded. The pinned board interconnects offer a clean wire free look and the compact stack can fit even the tightest builds with ease.

We have carefully combined some of the best FPV technology in our arsenal into a tightly pre-assembled package that offers the fastest way from starting a new build to FPV Flight!

6 in 1 Main Board - F4 FC + Betaflight OSD + LC Filter + 5v Regulator + Blackbox + Buzzer
The heart of the flight control systems is a powerful STM32F405 MCU and MPU6000 gyro flashed with Betaflight for proven rocksteady flight stability. The integrated LC filter with 5v/3A voltage regulator means clean power for all the FC/OSD components and other attached boards such as VTX, RX and FPV Camera. Betaflight OSD with easily customizable layout of vital flight information and ability to change FC flight parameters. Blackbox flight log recorder with 16mb flash memory. On board buzzer for battery level warning or lost model finder functions.

48 Chanel 5.8ghz Switchable Power VTX Board
VTX allows for easy change of VTX channel/band via push button. Also transmit power is switchable from 25mw to 200mw. Included is a lightweight 5.8ghz dipole whip antenna or 80mm extension cable with SMA connecter for use with your own antenna.

Frsky XM+ 16ch Sbus Micro RX Board
Genuine FrSky XM+ receiver is included with 16 channels with RSSI. It possible to connect other brands of Serial or PPM via the dedicated RX pads.

Bullet 30A - 4 in 1 ESC + Current Sensor Board
The ESC system is comprised of 4 x 30A continuous Bullet ESC’s using top quality MOSFETs and running BLHeli_S firmware. Your choice of protocol: DSHOT, Multishot, Oneshot 125. The onboard current sensor monitors mAh consumed and pass the information to OSD for an accurate way to monitor battery level and peak power consumption.

EMAX F4 Magnum AIO FPV Stack

6 in 1 Main Board
 Flight controller (OMNIBUSF4 Firmware)
 STM32F405 MCU
 MPU6000 accelerometer/gyro (connected via SPI)
 On-board Betaflight OSD
 On-board Buzzer
 Integrated 5V/3A BEC
 Integrated LC Filter
 Dedicated PPM/ Sbus receiver input
 On-board high-capacity 16mb black box flight log recorder
 3 UART pads
 Addressable LED pad

VTX Board
Frequency band:5362-5945MHz
 Channels: 48 (band/channel chart can be found in Manual)
 Transmit power:Switchable 25/200mw
 Supply voltage:4.5V-5.5V
 Antenna port :50Ω ipx ufl connector
 Antenna:1pc lightweight 5.8g dipole 100mm whip
 1pc SMA extension 80mm length

4 in 1 ESC and Current Sensor Board
 Continuous current 30A and 40A burst per motor
 Supply voltage 2-4S Lipo
 Silabs EFM8BB21F16G 50mhz MCU
 BLHeli_S firmware

 Top quality MOSFET
 3oz high TG PCB board
 On-board current sensor

Receiver Board
Genuine FrSky XM+ receiver
D16 Mode
16 channel SBUS
RSSI on Channel 15

1 x B-017 XT60 female connector
1 x Hot-shrinkable tube Φ4.5*0.2*L20mm red
1 x Hot-shrinkable tube Φ4.5*0.2*L20mm black
1 x Silicon wire 14AWG L=80mm red
1 x Silicon wire 14AWG L=80mm black
1 x Antenna adapter with SMA female connector L=80mm
1 x 5.8G Dipole Whip antenna L=100mm
9 x Nylon nuts M3 black
5 x Nylon screws M3x6 black
5 x Nylon posts M3*5+6mm black

Weight: 23g

Size: 36mmx36mm


More Information
Is Featured No
Private Event Use Category Settings
Private Event Landing Page Login Page
Write Your Own Review
You're reviewing:EMAX F4 Magnum AIO FPV Stack
Your Rating