sales@kooltoyz.co.uk Need Help? Call us on: 0131 663 3377

DJI SPREADING WINGS S1000+ OCTOCOPTER FRAME ONLY

£1,457.00
Out of stock
SKU
DJI S1000+ FRAME
DJI SPREADING WINGS S1000+ OCTOCOPTER FRAME ONLY

DJI Spreading Wings S1000+

FRAME ONLY


The DJI S1000+ is the flagship of DJI’s professional multirotors. It’s a powerful, stable, responsive and user-friendly aircraft that’s ideally suited for high-end, professional filming and photography.

 Everything about the design helps to achieve a clear 360 degree view for the camera – retractable landing gear, vibration dampers, angled arms and pared down gimbal mounts.

 A new, patented power distribution board, built-in, high-speed electronic speed controllers and motors coupled with highly efficient, folding propellers combine to maximise power efficiency and ensure dynamic stability.

 You have a choice of two professional flight controllers the DJI WKM or the A2 and each one ensures that the S1000+ can fly and hover reliably – something that’s essential when you’re earning your living from video or stills.

 The S1000+ weighs in at around 4.4kg but its maximum take-off weight is in the region of 11 kg. If you’re planning to fly your S1000+ commercially then you’ll have to make sure that your flight assessment qualification covers you for all aircraft under 20 kg. The lower weight category only covers you for multirotors weighing 0-7kg. The S1000+ can easily carry the full range of DJI’s Zenmuse Z15 camera gimbals. With a 6S 15000mAh battery on board it can fly for up to 15 minutes.

The V type mixer design of the S1000+ provides large amounts of propulsion combined with efficient use of power. The arms and landing gear are made of strong and light carbon fibre which makes them remarkably tough and stable. Each arm is angled upwards by 8 degrees to make the aircraft more stable when rolling and pitching. The arms are also twisted or inclined by 3 degrees from the vertical to make the S1000+ more responsive when yawing. It means a small amount of the propeller’s lift is used to help the motor’s torque effect when yaw is needed.

 DJI’s fastest available electronic speed controller (40A) is built into each arm. The combination of 4114 pro motors, high performance 1552 folding propellers as well as the V-type mixer design give each arm of the S1000+ a maximum thrust of 2.5kg – that’s 20kg from all eight motors combined. The latest motor uses a single wire stator design, offering improved heat dissipation, better performance, and a tidier, more reliable system.

 A redesigned, rebuilt power distribution system improves safety and reliability. Gold-plated metal bearings with a unique screw design secure the power cords, ensuring cables will not come loose during flight and allowing easy setup. Prevent short circuits and easily plug in your power supply with the AS150 spark proof plug.

 The upper centre board can be removed, giving you access to the inertial measurement unit (IMU). There are also eight positions reserved for any extra equipment you need to add. So installation of your main controller, iOSD, Lightbridge, or any other accessories is faster and easier than ever before. This new centre board structure is perfectly compatible with either the DJI WKM and A2 flight controllers.

 The S1000+’s gimbal bracket is separated from the main frame by specifically designed dampers. This significantly reduces high-frequency vibrations and makes your shots clearer and sharper.

 With arms that fold in to save space, the S1000+ is built to be taken wherever you need to go. Then when you want to fly, you are ready to start shooting in just a few minutes. The S1000+ really is a professional’s machine.


Features

    LARGE CARRYING CAPACITY, STRONG AND STABLE
    Free yourself from weight limits and fly with heavy DSLR cameras such as the 5D Mark III with the advanced eight-rotor propulsion system of the S1000+. The S1000+’s arms and landing gear are made of sturdy carbon fiber, giving remarkable stability and strength. You’re flying in a variety of flight conditions with confidence, knowing your gear is safe.


    HIGHLY PORTABLE, WITH FOLDABLE ARMS
    With arms that fold in to save space, the S1000+ is built to be taken wherever you need to go. Then when you want to fly, you are ready to start shooting in just a few minutes.
    REMOVABLE UPPER CENTER BOARD
    The upper center board can be removed, giving you access to the IMU. Additionally, there are eight positions reserved for your extra equipment. So installation of your main controller, iOSD, Lightbridge, or any other accessories is faster and easier than ever before.
    This new center board structure is perfectly compatible with the DJI WKM and A2 flight controllers.


    NEW POWER DISTRIBUTION SYSTEM
    A redesigned, rebuilt power distribution system improves safety and reliability. Gold-plated metal bearings with a unique screw design secure the power cords, ensuring cables will not come loose during flight and allowing easy setup.


    SPARKPROOF PLUG
    Prevent short circuits and easily plug in your power supply with the AS150 sparkproof plug.


    PROFESSIONAL QUALITY
    Weighing just 4.4kg, the S1000+ has a maximum takeoff weight of 11kg. This means you can easily carry most cameras and gimbals, including your 5D Mark III. Used with a 6S 15000mAh battery, it can fly for up to 15 minutes.


    WIDE RANGE OF SHOOTING ANGLES
    Retractable landing gear and a low gimbal mounting bracket combine to enable a wide range of possible shooting angles and camera motions.

   COMPATABLE WITH ZENMUSE Z15 GIMBALS

Full compatibility with DJI’s entire line of Zenmuse Z15 camera gimbals, including the new Z15-5D III (HD), provides unmatched stability in flight.


    REDUCED VIBRATIONS, CLEARER FOOTAGE
    The S1000+’s gimbal bracket is separated from the main frame by specifically designed dampers. This significantly reduces high-frequency vibrations and makes your shots clearer and sharper.


    GREATER POWER
    A 40A electronic speed controller (ESC), our fastest available, is built in to each arm. The 4114 pro motors, high performance 1552 folding propellers, and V-type mixer design combine to give each arm of the S1000+ a maximum thrust of 2.5Kg.
    Our latest motor adopts a single wire stator design, offering improved heat dissipation, better performance, and a tidier, more reliable system.


    INNOVATIVE ARM DESIGN
    Each arm is designed with an 8° inversion and a 3° inclination, making the aircraft more stable when rolling and pitching, yet more flexible when rotating.

More Information
SKU DJI S1000+ FRAME
Is Featured No
Private Event Use Category Settings
Private Event Landing Page ------------------------------
Write Your Own Review
You're reviewing:DJI SPREADING WINGS S1000+ OCTOCOPTER FRAME ONLY
Your Rating