Custom Build 139 Sky Hero Hexacopter 750mm
- Click Logo for All
- Sky Hero RC Models
Sky Hero Hexacopter
CUSTOM BUILD 139
This is our custom build (139) the components above are professionally spec'd, assembled, calibrated, tested, and flown into a 1 off unique truly RTF multirotor. Everything is already done on this machine by our BNUC qualified pilot and engineering team. The autopilot, radio and gimbal are all set up and tested, all the features are real world tested including RTL, Fail safes, Flight modes, mission etc. The buyer will be supplied with a operations guide, switch setup and basic instructions. We will offer phone/email support for your build if required.
If you are looking for us to build another similar sky hero model then please call 0131 663 3377 for further details, generally builds take 1-2 weeks and cost £350-500 done by our BNUC qualified tech.
This listing is for a hexacopter if you are looking for a 850mm, 1000mm or a SPYDER please call 0131 663 3377 for a custom quote.
We understand choosing the right package is very important and very time consuming. More than likely you will already have spend many hours searching, spec'ing and pricing. Building these machines properly is very time consuming, technical and often very frustrating for the inexperienced, mistakes can be very costly. Take the pain and hassle away with a custom kooltoyz build.
Each build is different making this a 1 off machine, once it's gone it's gone,
Feel free to call us and discuss your needs before you spend a penny.
Kooltoyz Custom Package (137) Includes
GENUINE SKY HERO LITTLE 6 FRAME EXTENDED TO A 750mm
6x Avizar Motors 3536 380KV
6x FVT ESC 30A BLHeli
1x Genuine 3DR PIXHAWK Autopilot
1x 5v BEC/ Battery Sense Module
Pixhawk Tri L.E.D Indication Module
1x NEO M8N
1x 433Mhz Telemetry System
1x Taranis X9E
Frsky 8CH X8R PPM Receiver
6x Genuine Graupner E-Props 13X8 Props
PDB + 2 BEC's
14 AWG Silicon Wire
8 AWG Silicon Wire
ShrinkTek Expanding Sleeve
2x Tattu 12000mAH 6S 22.2v 30C Batteries
1 x Overlander Battery Charger RC6 Touch
FXT 25/200mW VTX for FPV
1x 3 Axis G-3S Gimbal (Suits SONY RX100/WX500 Series Camera)
1x Sony DX100 Camera
RC700D 7" Monitor
FPV Monitor Bracket
Flytron Strobon Navigation LED'S (x6)
|SKU||Custom Build 139|
|Private Event||Use Category Settings|
|Private Event Landing Page||------------------------------|