DX8 8-CHANNEL 2.4GHz DSMX/2 AIRCRAFT TRANSMITTER WITH TELEMETRY
SPM8800EUC MODE 2
NEW DSMX VERSION
DX8 + AR6210 + AR6115e + AR8000
128MB SD CARD + TM1000
Spektrum innovation gives RC pilots a new level of security and ease-of-use with the DX8. In addition to providing the benefits of Spektrum’s patent-pending DSMX2 technology, the DX8 introduces advances in software, telemetry and ergonomics you simply won’t find in any other 8-channel system.
The DX8 is Spektrum’s first aircraft system that incorporates integrated telemetry. The transmitter’s screen displays real-time telemetry including receiver battery voltage, flight log data and signal quality. External sensors allow rpm, external voltage and temperature to be displayed on screen in real time. Alarms can be programmed to warn of low battery, over temperature, exceeded rpm and diminished RF signal strength.
The DX8 offers sophisticated programming to meet the demands of even the most experienced airplane and helicopter pilots. An easy-to-use rolling selector combined with intuitive software makes setting up models quick and easy. The DX8 is SD-card compatible allowing an infinite number of models to be stored and transferred. Plus firmware updates can be downloaded from the web providing you with the latest software upgrades at the click of a mouse.
Special Offer - Includes Additional AR6210 and AR6115E Receivers whilst stocks last
8 Channel DSMX/2 Full Range Transmitter
Includes 16MB SD Card, Full Range Telemetry module, AR8000 Rx and more
Completely New Gimble Mechanics
User Adjustable Mode Configurations
Superior Ergonomics - made to fit the way you fly
Spektrum Data Interface - SD card interface enables more model saves to memory and sharing setups with other DX8 owners.
Spektrum Airware - Enahnced Wing Type Programming
Spektrum Airware - Active Gyro and Governor Trim
Spektrum Airware - Electronic E-Ring Pitch/Cyclic mix travel limiter
Built-in Telemetry - Fly smarter with vital model feedback
Smart Charge - Global Charging System
Enhanced Wing Type Programming
When selecting a wing type for an airplane, Spektrum AirWare graphically depicts the type you’ve chosen and will automatically configure the necessary mixes for the pilot. This saves time and reduces the chances for error when programming complex control surface configurations.
Active Gyro and Governor Trim
Fine tune rotor speed and gyro gain while in flight using trim switches you assign.
Electronic E-Ring™
When programming the cyclic and pitch mixing for a helicopter, it is possible for the sum of the two mixing values to exceed the mechanical travel limits of the servos. This can cause them to be overdriven into a locked position. Spektrum AirWare’s Electronic E-Ring prevents this by automatically limiting servo travel if the sum of the cyclic and pitch values exceeds servo limits.
The DX8 will initially be able to track four key safety and performance factors:
Battery Voltage
Never again will you have to wonder whether or not you have enough voltage to keep flying. Being able to monitor voltage will also help you detect a worn out battery pack before it prematurely ends your flight. The telemetry module is plugged into the receiver and will automatically relay receiver voltage. A separate sensor for tracking main battery voltage in electric aircraft will be included.
Signal Quality
The telemetry module will keep tabs on the quality of the signal coming to the receiver and send this information back to the DX8 where it is represented on the LCD screen using a familiar “signal bar” scale.
RPM
Pilots can use the RPM telemetry data to check the effectiveness of new mixture settings, new battery packs, or perhaps a new propeller/motor combination. The RPM sensor is sold separately.
Temperature
Is the engine running too lean? Is there enough airflow reaching an electric motor? Is my battery getting too hot? With the DX8, you will get real-time answers and be able to take action well before damage occurs. One temperature sensor is included.
Beyond new software and telemetry, the DX8 is also the first Spektrum radio to introduce the Spektrum Data Interface™. The SDI is designed for use with standard SD memory cards and adds a whole new level of flexibility and ease-of-use. With the SDI, the capability of the DX8 is extended and expanded.
Save More Models to Memory
The DX8 has enough on-board memory for up to 30 models before you even need to think about using the SDI. But with the SDI, memory for thousands of models could be stored on the SD card or transferred to a PC hard drive for backup.
Share Model Setups
Share setups with other DX8 owners at the field or transfer them from your SD card to your PC and attach them to an e-mail. This makes it easy to gain from the experience of others or help others succeed.
Stay Up to Date
With the Spektrum Data Interface, you won’t have to send your DX8 into a service center to get the latest Spektrum AirWare enhancements. You can download them onto your SD card and upload them to the DX8 yourself.
Completely New Gimble Mechanics
The DX8 is the first Spektrum radio to feature new gimble mechanics. Each gimble boasts the silky smooth precision of dual ball bearings on each axis. That’s four ball bearings per gimble. They also feature adjustable spring tension and control stick length so you can fine tune the control feel exactly the way you want it.
User Adjustable Mode
Configurations
The DX8 comes out of the box with a standard Mode 2 stick configuration. Its new software and gimble mechanics, however, make it possible for you to change the stick setup to Mode 1, Mode 3 or Mode 4 in minutes.
Comfort Grips
Soft, no-slip rubber grips on the back and sides of the transmitter case naturally conform to your hands and make long flights much more comfortable.
Smart Charge™ Global Charging System
Spektrum was the first to make frequency conflicts and interference a thing of the past. With the DX8’s new Smart Charge global charging system, Spektrum is first to make charging hassles a thing of the past, too.
This ingenious on-board charging system can be powered by any 12V power supply with a standard 4mm plug. That includes 12V power supplies from other radio manufacturers AND those that come with many household electronics. Smart Charge even detects the chemistry of the transmitter batteries you’re using (LiPo or Ni-MH) and automatically adjusts the charge current, rate and cutoff.
With the transmitter power turned off, plug the included charger into a wall outlet. Then plug the male charge plug into the charge jack. The blue LED on the front of the transmitter should illuminate. The charger charges at a rate of 200mA and a fully discharged battery requires a 10–12-hour charge time.
Spektrum DX8 Features
11ms Frame Rate for ultra high speed responce rate.
Large area, 128x64 resolution screen allows clear menus and easy operation
Aircraft and Helicopter modes
2000mAh Ni-MH AA battery welded pack for extended run times; security and durability of heatshrink/welded pack.
2048 Resolution. Thats 2048 steps of travel for each servo; smooth transition from stick input to servo movement.
30 Model Memory. Storage space for additional models.
Data Transfer. Transfer model programming/setup data to between radios.
DSM2 Dualink Technology. Second generation Digital Spread Spectrum Modulation, superior path diversity.
Electronic "E Ring". Electronically prevents overdriving the cyclic servos.
Mode Selectable. Easily change the radio between modes 1 through 4 both in software and hardware.
ModelMatch technology prevents wrong model syndrome.
Integrated range check function displays flight log data, (Antenna Fades, Frame Losses, and Holds).
Real Time Telemetry. Radio will display real time monitoring of flight log date (Antenna Fades, Frame Losses, and Holds) as well as receiver pack voltage.
SD/MMC Compatible. Increased model storage via secure digital or multi media card data storage.
ServoSync. Synchronised servo movement for CCPM or Dual Elevators.
Timer (start on Throttle up). Two options (Up-Timer) and (Down-Timer); programmable to either the trainer switch, or throttle stick.
12V DC w/Multi-Country plug types. Convenience and ease of use.
3 Wing Types. Dual Aileron, V-Tail, and Elevon mixing options available.
5 Point Graphic Pitch Curve
5 Point Graphic Tail Curve
6 Programmable Airplane Mixes
Active gain control. Allows for inflight adjustments of the gyro gain settings.
Flap Delay w/elevator compensation. Adjustable control of flap servo speed
France Mode Selectable. The region setting screen is used to allow the DX8 to be in compliance worldwide.
Language Select. Change language displayed on the screen; English, Spanish, and French, German, and Italian will be supported.
Low battery voltage warning with both an audible and visual warning.
Programmable Flap System. Allows for elevator and flap positions to be programmed for landing and takeoff.
Swash plate timing. Allows for electronic correction of swash plate phasing; Helps helicopter perform better.
Telemetry warning screen(Audible/Buzzer). Provides both tone and vibration alerts.
Timer Integrated. Tracks total on time of transmitter.
Trainer Mode. Allows for the use of a trainer cord for teaching student pilots how to fly.
3 Airplane Flight Modes. Allows versatility in programming/set-ups/installations.
3 Programmable Dual Rates (Aileron, Rudder and Elevator)
3 Programmable Helicopter Mixes
4 Micro Second Trim Steps. Changes the servo 4 micro seconds per trim step
4 Swash Plate Types. Swash plate options to match the particular swashplate of the helicopter.
5 Point Graphic Throttle Curve. Allows for adjustments of the throttle to optimise engine/motor RPM.
Contrast adjustment. Allows for screen contrast adjusment for optimised viewing of the display.
Differential. Precise electronic adjustment of aileron travel when flaperon or elevon wing type is actived .
Digital trims w/dual speed trim scroll. Convenience and ease of use.
Exponential throw. Allows for greater control; allows control/stick movements that are less/more sensitve around center stick position.
French Bandwidth Capable. User enabled bandwidth restriction; Allows for compliance with French regulatory restrictions.
Gyro Adjust, Normal, Stunt & Hold. Allows for seperate gyro gain values in each flight mode.
Model Copy. Copy model settings from one model memory to another.
Model Name. Name each model memory.
Model-Reset. Allows the user to reset each model memory to the default settings.
Roller/selector user interface. Convenience and ease of use.
Servo Monitor. Displays servo movement direction when different programming functions, sticks and/or switches are moved.
Servo Reverse
Sub Trim
Swash plate expo
Swash Plate Mix. Allows individual setup of cyclic servos
Switch Select. Allows for user selectable/changeable switch locations
Throttle Cut. The throttle channel moves to a preprogrammed position (low throttle, low trim) allowing the safe and convenient shut down of the engine.
Travel adjust (End Point Adjustment).
Warning Screen Air. Provides audible warning to user and does not transmit when certain switches/stick positions are not in their proper locations. (THRO, GEAR, FLAPS, F.MODE)
Warning Screen Heli. Provides audible warning to user and does not transmit when certain switches/stick positions are not in their proper locations. (THRO, STUNT, HOLD).
|
Radio Controlled Helicopters 
