DX2.0 DSM 2CH Pistol w/1-Z270 SX & 1-Z590M SX

Unlike ordinary 2-channel radios, Spektrum's new DX2.0 will put you on the drivers' stand with complete security without breaking the bank. That's because it employs the same breakthrough, no-pins, no-crystals, no-glitches, no-interference DSM 2.4GHz technology that helped propel Frank Calandra Jr. to his 1/12th scale victory at the first annual Las Vegas IIC.

The DX2.0 is a 2-Channel, 2-model memory, 2.4GHz DSM (Digital Spectrum Modulation) equipped computer radio control system for worldwide surface applications.  Unlike ordinary 2-channel radios, Spektrum’s DX2.0 will put you on the drivers’ stand with complete security.

 

Key Features

• Built-in 2.4GHz DSM technology
• SR3000 3-Channel DSM Receiver
• Z270 Standard Race Servo
• Z590 Hi-Torque Race Servo

DX2.0 DSM 2CH Pistol w/1-Z270 SX & 1-Z590M SX  Product Specifications
 # of Channels: 2
 Modulation: DSM
 Band: 2.4GHz
 Servos: 1-Z270 Standard Race and 1-Z590 Torque Race
 Receiver: 1-SR3000
 Model Memory: 2

---------------------------------------------------------------------------------------------------------------------------

SR3000 DSM 3 Channel Receiver: Surface
 

DSM is Digital Spectrum Modulation—a purely digital RF link between transmitter and model that is based on Direct Sequencing Spread Spectrum technology. It operates within the ultra-high 2.4GHz worldwide ISM band, provides unequalled signal resolution, and is immune to the most common forms of RF interference. It will even allow a car to “talk” back to the user. It requires no crystals and completely frees racers from ever having to monitor frequency usage again. Best of all, with Spektrum’s DSM System racers can literally plug this phenomenal technology into existing transmitters like the JR R-1 and Airtronics M-8.

The DSM System

The DSM System consists of a transmitter module and 3-channel receiver. Four versions of the system are available that include modules designed specifically for use with JR, KO, Futaba/Hitec or Airtronics 3-channel, module-based transmitters. No crystals or complex modifications are required. Just buy the DSM System for your transmitter, plug in the DSM module and install the lightweight DSM receiver in your car. All that’s left to do is spend a few seconds “binding” the receiver to the module and you’re ready to go. It’s that easy.


 
Key Features

3 Channels
No crystals or complex modifications are required
Immune to the most common forms of RF interference