SUPERSKIDS TITANIUM SUPERBOOM

SuperBoom is our Titanium alloy tail boom. It's the same Ti alloy commonly used in aerospace engineering. SuperBoom has a nice, polished finish and engraved SuperSkids logo. Adding the power of Titanium to your micro heli will do more than just make it look good. Ti won't crack and splinter like the stock carbon fiber tail boom, and it's stronger and less likely to bend than aluminum. If you do manage to bend it, the bends are generally more gradual and easier to straighten.

Note: On most helis, SuperBooms are designed to be glued in place with CA or epoxy in the same manner as the stock tail boom. The longer SB305 boom used with SuperSkids Landing Gear and some light batteries may make it harder to get a good fore/aft  balance, especially when used with aftermarket tail housing assemblies. If you need to trim (shorten) the boom for better weight distribution, be careful not to make it so short that you have main and tail rotor collisions. Trimming the boom in these cases is the customer's responsibility, not ours. SuperBooms are a stand-alone product designed to work on stock helicopters.

SB305 is 12" long (4.95 mm x 305 mm) and generally used for E-flite, Esky (FP and CP2) and similar CP helis.