|
|
ESKY 2.4GHZ TRANSMITTER EK2-0406H + RECEIVER EK2-0707
Convert your 35MHz 6 channel heilicopter to 2.4GHz in seconds with this transmitter & receiver kit, simply remove your old 35MHz receiver and fit your new 2.4GHz one in its place. Switch on transmitter and complete binding process and your ready to fly, no more crystals, no more 3 foot ariel and no more interference EVER!!!
Enjoy a more responsive heli with increased range.
2.4GHz is the future of RC Helicopters be part of it!
Suitable for Esky Honey Bee CP2 RC Helicopters.
WHAT IS 2.4GHZ TECHNOLOGY
Operating at 2.4GHz puts the radio control out of the frequency range of any 'noise' caused by the other electronic components - such as the motor, speed controller and any metal to metal noise - eliminating interference and glitching that can affect a 35mhz system. Obviously, the last thing you need when piloting an RC helicopter is anything that might cause loss of control or a crash (you may not be aware if your neighbour is also flying on the same frequency as you in his back garden, for example). The built-in security of the 2.4G system allows you to maintain radio control at all times, ensuring your safety and that of others around you. Instead of transmitting on one channel at a time, both the transmitter and receiver are constantly hopping from channel to channel - at over 1000 times a second! When you initialy 'pair' your transmitter to your receiver, they initiate the synchronised sequence of channel hopping.With 2.4GHz effectively 40 channels are available and the sets automatically set themselves to an unused frequency when switched on. Operation is constantly self monitored and the set will move to an unused frequency if any interference is detected. Because 2.4G RC systems work on higher frequency short wave length, the transmitter antenna is only about 15cm long and flexible - avoiding bends and breakages that can occur with traditional 35Mhz telescopic aerials! The receiver antenna is much shorter too - allowing for much neater installation of the radio gear in the helicopter.
ADVANTAGES OF 2.4GHz
(1).Traditional 35MHz remote controls require a transmitter with 750mW transmitting power consumption but 2.4G transmitter only needs 4mW power consumption so batteries last much longer.
(2)2.4GHz frequency band completely eliminates frequency interfering when flying so no more potential crashed due to radio glitches or interference.
(3)2.4GHz remote control systems automatically bind frequency using a microprocessor and constantly change so no more need for crystals and more importantly no chance of someone switchiing on there transmitter with the same crystal as you, causing your heli to crash.
(4).Dual transmission gives better response and control of you heli and reduces servo quiver.
(5).2.4Ghz System frequency wave range is 1/4 of the usual used frequency wave range so the transmitter antenna is just 14.5cm in length making flying indoors much easier.
|