JUST RELEASED JUST RELEASED JUST RELEASED

2.4GHz 2.4GHz 2.4GHz 2.4GHz 2.4GHz 2.4GHz

Easy Copter XS 2.4 GHz

If you’re a beginner or intermediate, the Easy Copter XS 2.4 Ghz is here. Suitable for flying for indoors and outdoors, this best selling model enables you to enjoy your time even on slighty windy days. The Easy Copter XS is packed with the 2.4 Ghz technology - a revolutionary technology eliminating frequency interference.

The Easy Copter XS’s two main motors apply two opposing forces on the very same shaft, and thus cancelling each other and providing ultimate stability when flying. This stability not only keeps your helicopter in the air, but also helps you practice new tricks utilising your 4-in-1 receiver complete with: an electronic gyro, mixer, motor controller, and receiver.

Your Easy Copter XS is a ready to fly package with bonus parts such as: spare blades, interchangeable crystals, and li-Po batteries and balanced charger. Your transmitter, with 8 dry cell batteries provided, is ready to fly on mode 2 with an easy to monitor LED voltage indicator.

2.4 GHZ technology? What is that?

Let’s look at this way, you and your neighbour, Jack, happen to be huge fans of RC toys. You’re always competing and showing off your newest toys. So what if you and your neighbour happen to be flying you helicopters on the same frequency? That’s right, a big collision ahead! With the 2.4 GHZ technology, your RC toy is out of the frequency interferences of other components around such as: motor, transmitters, and other electronic devices. Now that we’ve got that sorted out, your question is that how can such technology eliminate interferences?

The answer to that lies in the fact that normal transmitters stick to one channel. With the 2.4 GHZ technology, however; all your electronic transmitters keep alternating channels at a massive rate of over 1000 times per second. If you’re worried about synchronizing your transmitter and receiver, the 2.4 GHZ technology is automatic and both parts will synchronize frequencies at a rapid rate.

Add to that, you’ll notice your transmitter antenna is less than 15 cm long. This is simply due to the way the 2.4 GHZ operates on shorter wave lengths but higher frequencies. You won’t be worried about your antenna breaking or bending, since it is short and tucked away. Here are some killer advantages of the 2.4 Ghz technology:

Ÿ         Traditional 35MHz remote controls require a transmitter with 750mW transmitting power consumption but 2.4G transmitter only needs 4mW power consumption. This means more hours of fun without the batteries dying out on you.

 Ÿ         2.4GHz frequency band completely eliminates frequency interfering when flying so no more collisions because of “noise” frequencies.

 Ÿ         2.4GHz remote control systems automatically bind frequency using a microprocessor and constantly change. This can only mean that you won’t need to buy those frequency crystals anymore, all you have to do is take out of the box and fly!

 Ÿ         Dual transmission gives better response and control of you helicopter and reduces servo quiver.

 Ÿ         2.4Ghz System frequency wave range is 1/4 of the usual used frequency wave range so the transmitter antenna is just 14.5cm in length making flying indoors much easier.

To sum it up, with the 2.4 GHZ technology, you’ll have the ultimate control over your helicopter. No interference, no antenna breaking, and no synchronizing trouble. What more could you ask for? The Easy Copter XS 2.4 GHZ gives you the ultimate control, are you still here? Purchase the Easy Copter XS today and say goodbye to interference problems!