Fully loaded and upgraded the Blade CP Pro 2 has raised the bar again for ready to fly 3D mini electric helicopters. It's the only fully 3D-capable RTF mini heli that performs aerobatics like backward hurricanes and pirouette flips right out of the box. Loaded with incredible features and an unmatched level of 3D performance the Blade CP Pro 2 is a 3D mini helicopter that really sets the standard.
The high-power 370 main motor offers brushless-like performance, while the direct-drive N60 tail motor and G110 heading lock gyro offer incredibly locked-in tail control. The included E-flite HP6DSM 6-channel transmitter features full-range Spektrum 2.4GHz DSM2 technology that along with the factory-installed Spektrum AR6100 receiver, provides the locked-in, interference-free performance DSM is known for. A 2-in-1-control unit offers complete control of the main and tail motors, while three DS75 digtal sub-micro servos deliver precise (CCPM) collective-cyclic-pitch-mixing control of the bell-hiller mixing equipped rotor head.
Packed with features and a dynamic new body, intermediate to advanced pilots will enjoy testing their aerobatic skills with the Blade CP Pro. Never before has so much 3D aerobatic capability been available in an RTF mini CP class helicopter, right out of the box without the need to purchase additional parts or upgrades.
Key Features
- 100% assembled and test-flown at the factory
- Includes everything you need to fly, right from the box
- HP6DSM 6-channel transmitter with full range Spektrum™ 2.4GHz DSM2™ technology, flight mode, throttle hold, dual rate switches and more
- Factory-installed Spektrum AR6100 receiver, 2-in-1 control unit and DS75 digital sub-micro servos offer precise and powerful control
- High-power 370 main motor with heat sink provides brushless-like performance
- Direct-drive N60 tail motor and G110 micro heading lock gyro offer incredibly locked-in tail control
- 3S 11.1V 800mAh Li-Po battery and DC Li-Po balancing charger
- CCPM control and Bell-Hiller mixing offer lightning-fast cyclic response and full 3D aerobatic capability
- Plug-and-Play® compatibility with brushless power systems
- Ready to fly from the box
- Powerful 370 main-motor
- Direct drive tail motor power system
- CCPM and Bell Hiller mixing
- Symmetrical main rotor blades
- Main and tail motor heat sinks
- 3-cell 11.1Volt 800mah Li-Po battery
- DC Li-Po balancing charger
- 3 in 1 control unit
- HP6DSM 6-channel 2.4Ghz transmitter
- Spektrum AR6100e receiver
- DS75 digital sub-micro servos
Specifications:
- Main Rotor Diameter 515mm (20.3 inch)
- Tail Rotor Diameter 148mm (5.8 inch)
- Weight with Li-Po 298g (10.5 oz)
- Length 526mm (20.7 inch)
- Motor size 370 main motor, N60 tail motor
- Battery
- (included) 3-cell 11.1Volt 800mah Li-Po
- Charge 3S 11.1Volt Li-Po Balancing charger 12Volt DC input (included)
- Transmitter HP6DSM 2.4GHz DSM2 6-channel (included)
- Receiver AR6100E 2.4Ghz DSM2 Microlite (installed)
- On-Board Mixing 3-in-1-mixer/speed control and gyro (installed)
- Servos DS75 Digital Sub-Micro (3 included)
- Control system CCPM
For the kind of connectivity needed for 3D the Blade CP Pro 2 teams up with E-flite’s HP6DSM 2.4Ghz transmitter and a Spektrum AR6100e micro receiver. The HP6DSM is a full range transmitter utilising Spektrums 2.4Ghz DSM2 technology, so you’ll get a rock-solid RF link that will deliver the the locked-in, interference-free performance DSM is known for.
 
E-flite HP6DSM 2.4GHz DSM2 transmitter (included), Spektrum AR6100 Microlite receiver (installed), 2-in-1 contol unit (installed), G110 micro heading lock gyro (installed), DS75H digital sub-micro servos (3 installed), 120-degree CCPM
E-flite HP6DSM 6-channel transmitter featuring full-range Spektrum 2.4GHz DSM2 technology.
E-flite 3-cell 11.1Volt 800mah Li-Po battery pack.
3S 11.1Volt Li-Po Balancing charger 12Volt DC. input
4x Transmitter batteries
|
Esky Helicopter 
.jpg "Eflite")
